Hi, sir. If the servo is in reverse, you can enter the basIc menu of the transmitter and set it from NOR to REV. Here is the detailed manual for your reference. www.radiolink.com/rc6gsv3_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_officialI have a question. I have a Hobbywing Fusion quickrun SE 1800kv setup on my Axial scx10. I followed your A.B.S settings and so far no issues. What is the best crawler A.B.S settings? Also I have some LED lights that I installed on channel 3 and 4 that are plugged into the receiver. I tried the Aux setting to assign channel 3 and 4. Channel 3 I have assigned to switch SWA and channel 4 I have assigned to switch SWD. I do have a splitter that I can plug into one channel for both sets of lights. Anyway when I assign the switches on the channels 3 and 4 and click the switches the lights remain on I can't turn them off and on. Do I need a control switch in order to turn off and on via the RC6GS V3 transmitter?
@@DirtDobberRC Hi, sir. The ABS settings depends on what effect you want. So you can set what values you want according to your needs. And for the light control, we thinks you may need a control board for your LED light. Here is a link for your reference. ruclips.net/video/oEEy_HxCZWU/видео.html& If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Holaaaa, como puedo actualizar el framework del la rc4gs v1 ? Tengo entendido que puedo visualizar la carga restante del vehículo desde el controllador/radiocontrol con una actualización...
Hi, sir. May I know what receiver are you using with RC4GS V1? And could you please check the production of the mainboard of your RC4GS V1? If the mainboard of your RC4GS V1 is produced before 2.18.1.1, it does not support model voltage telemetry function. If it is produced after 2018.1.1, you need to update the firmware to above V6.0.1. And you need R7FG or R8FG receiver to use telemetry function. We recommend you to take part in our trade-in activity to buy a new RC6GS V3 to use telemetry function. Because it comes with a R7FG receiver, which supports voltage telemetry. Here is the link for your reference. www.radiolink.com/newsinfo/844239.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Great Explination of the ABS function and how to adjust it.
Thanks Much for these vids. They'll help many people.
Thanks
Amazing feature, I use it on my RC8x along with traction control and have prog mixing apply 5% brake when turning at full throttle.
Thank you for your support.
Great tutorial ... Awesome transmitter
Thanks
Thanks!! My breaks where pumping in reverse and I have spent 2 days figuring out how to fix this. Awesome video!
Hi, sir. If the servo is in reverse, you can enter the basIc menu of the transmitter and set it from NOR to REV. Here is the detailed manual for your reference. www.radiolink.com/rc6gsv3_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_official yes sir that's exactly what I had to do. Thank you
@@DirtDobberRC Our pleasure. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_officialI have a question. I have a Hobbywing Fusion quickrun SE 1800kv setup on my Axial scx10. I followed your A.B.S settings and so far no issues. What is the best crawler A.B.S settings? Also I have some LED lights that I installed on channel 3 and 4 that are plugged into the receiver. I tried the Aux setting to assign channel 3 and 4. Channel 3 I have assigned to switch SWA and channel 4 I have assigned to switch SWD. I do have a splitter that I can plug into one channel for both sets of lights. Anyway when I assign the switches on the channels 3 and 4 and click the switches the lights remain on I can't turn them off and on. Do I need a control switch in order to turn off and on via the RC6GS V3 transmitter?
@@DirtDobberRC Hi, sir. The ABS settings depends on what effect you want. So you can set what values you want according to your needs. And for the light control, we thinks you may need a control board for your LED light. Here is a link for your reference. ruclips.net/video/oEEy_HxCZWU/видео.html& If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Holaaaa, como puedo actualizar el framework del la rc4gs v1 ? Tengo entendido que puedo visualizar la carga restante del vehículo desde el controllador/radiocontrol con una actualización...
Hi, sir. May I know what receiver are you using with RC4GS V1? And could you please check the production of the mainboard of your RC4GS V1? If the mainboard of your RC4GS V1 is produced before 2.18.1.1, it does not support model voltage telemetry function. If it is produced after 2018.1.1, you need to update the firmware to above V6.0.1. And you need R7FG or R8FG receiver to use telemetry function. We recommend you to take part in our trade-in activity to buy a new RC6GS V3 to use telemetry function. Because it comes with a R7FG receiver, which supports voltage telemetry. Here is the link for your reference. www.radiolink.com/newsinfo/844239.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn